BUSTER BLASTER MODEL 100
 The Buster Blaster 100 is the only true Soda Blaster. It operates using a patented, self-cleaning venturi that requires little or no maintenance. The venturi combined with the metering system in the Buster Blaster soda blaster virtually eliminates downtime because of clogged lines and will deliver a precise and even flow of the blasting medium (Natrium Soda Blasting Medium) so you can complete your work on-time and on budget. A properly adjusted Buster Blaster soda blaster will reduce your use of soda by 20% and still have better on-the-job performance than any modified Sand Blaster
The Buster Blaster model 100 soda blaster has a capacity of 100 lbs of Natrium Soda, that's two bags.
The package includes:
- Powder coated 100 lb. soda capacity blast pot
- stainless steel plumbing
- 50 foot blast hose
- 50 foot line
- 1 nozzle sized for air supply
- fill funnel
- 55 foot red head control line
- 12 volt switch
- air over electric shut off
- Seven year warranty on pot shell
- One year warranty on rotary valve
When you order the Buster Blaster 100 soda blaster you should already have a high-volume air compressor. How much capacity do you need? It depends upon the size of the nozzle you are using. When you are using a nozzle with a larger opening, you increase the flow of air and soda and have a larger "brush" to blast with.
Here is a simple chart that shows the air flow required:
| Tip Size |
Minimum CFR required |
PSI |
| 3/16" |
55 |
125 |
| 1/4 |
98 |
125 |
| 5/16 |
168 |
125 |
| 3/8 |
237 |
125 |
Our Buster Blaster 100 Mobile unit comes with an air compressor that has a capacity of 210 CFM at 150 PSI It can supply enough air to run two Buster Blaster Soda blaster pots with 1/4 inch nozzles.
Another very important factor to consider when Soda Blasting is the dryness of the air. it is essential to supply the driest air possible to your soda blaster. Sodium Bicarbonate is hydrophilic, it loves water. It will readily absorb any moisture it can find in the air supplied to it. This leads to clogged lines and poor performance. At Soda Works we have been aware of this for years and have developed our proprietary air drying system which consists of our custom air cooling unit coupled with our SW-500 moisture separator. We have spent years perfecting this system to deliver the driest air possible to our Soda Blasters.
If you have your own high-volume compressor and are ordering one or more of our Buster Blaster soda blasters, be sure you also order our fan cooler pack which will deliver the dry air you need to soda blast in the efficient and profitable manner that our soda blasters make possible.
|
