BUSTER BLASTER MODEL 25
 The Buster Blaster 25 is the latest addition the the Buster Blaster family of products. The BB-25 is also a true soda blaster and operates using the same patented, self-cleaning venturing system as the Buster Blaster 100.
The Buster Blaster Model 25 is designed for small soda blasting projects, small body shops, engine and transmission rebuilders, small mold remediation jobs and hobby projects. It has a holding capacity of 25 pounds of soda which is a half-bag of Natrium Soda. It can be run from almost any smaller air compressor. It requires an airflow of 17 cfm at 125 psi for a 3/32" tip or 24 cfm at 125 psi for a 1/8" tip. The Buster Blaster 25 is not designed to be used on compressors with a capacity greater than 125 PSI
The package includes:
- Powder coated 25 lb. soda capacity blast pot
- 25 foot blast hose
- nozzle head shut off
- 3/32 “, 1/8”, 3/16” blast tips
- fill funnel
- built in combination pressure regulator/moisture trap.
- Five year warranty on pot shell.
Here is a simple chart that shows the air flow required:
| Tip Size |
Minimum CFR required |
PSI |
| 3/32" |
17 |
125 |
| 1/8 |
24 |
125 |
BUSTER BLASTER MODEL 25 WITH COOLER/DRYER PACKAGE
 To get the best results when soda blasting, the air you use needs to be completely dry. Any moisture in the compressed air will be absorbed by the soda causing it to cake, clump and jam your equipment.
Now there is a cooling-drying package that is sized just for the Buster Blaser 25 pot.
The air cooling/drying package manufactured by The Soda Works is just the thing you need.
They were designed and built to work with the BB-25 and we know they do!
|
